null

1. Turn ignition switch to ON (II)

 2. Within 4 seconds  press the LOCK or UNOCK button on one of the remotes.
     Make sure remote is aimed at the reciever near the glove box.

 3. Within 4 seconds turn ignition switch to LOCK (0)

 4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used
     in step 2

 5. Within 4 seconds turn the ignition switch to ON (II)

 6. Within 4 seconds press the LOCK or UNLOCK button the same remote.  Make
     sure the power doorlocks cycle to confirm you are in programming mode.
     Presss the LOCK or UNLOCK buton again.

 7. Press the LOCK or UNLOCK button on each remote you want to program. Make
     sure door locks cycle after you push each remote button to confirm system has
     accepted the remote.

  8. Turn the igniton switch to LOCK (0) to exit programming mode.

  9. Test remote(s)

--